Power chucks

Fast movements accompanied by a lot of pressure. And with tremendous tension for an absolutely secure hold. Extremely snappy solutions – yet entirely harmless!

Found products (23)


No.: 165837 power chuck without through-hole  KFD-EC, size 200, 3-jaw, controlled piston, without centrifugal force compensation, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 166183 power chuck without through-hole  KFD-EC, size 200, 3-jaw, controlled piston, without centrifugal force compensation, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 165841 power chuck without through-hole  KFD-F-EC, size 200, 3-jaw, controlled piston, without centrifugal force compensation, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 166187 power chuck without through-hole  KFD-F-EC, size 200, 3-jaw, controlled piston, without centrifugal force compensation, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 167325 power chuck without through-hole  KFD-F-EC, size 200, 3-jaw, KFD-F-EC, controlled piston, with centrifugal force compensation, with serration, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 167329 power chuck without through-hole  KFD-F-EC, size 200, 3-jaw, KFD-F-EC, controlled piston, with centrifugal force compensation, with serration, cylindrical center mount, DIN 6353

especially for extreme operation conditions like dry or raw part machining and / or high coolant pressure.
Chose your own maintenance i... more


No.: 40630 power chuck without through-hole  KFD, size 200, 3-jaw, standard design, serration 90° cylindrical center mount, mounting dimensions to DIN 6353

The KFD power chucks are characterized by a high load carrying capacity, long life and high workholding accuracy.
The operating power i... more


No.: 40639 power chuck without through-hole  KFD, size 200, 3-jaw, with cross-tenon cylindrical center mount, mounting dimensions to DIN 6353

The KFD power chucks are characterized by a high load carrying capacity, long life and high workholding accuracy.
The operating power i... more


No.: 46744 power chuck without through-hole  KFD, size 200, 3-jaw, weight reduced, serration 90° cylindrical center mount, mounting dimensions to DIN 6353

The KFD power chucks are characterized by a high load carrying capacity, long life and high workholding accuracy.
The operating power i... more


No.: 46745 power chuck without through-hole  KFD, size 200, 3-jaw, weight reduced, serration 90° cylindrical center mount, mounting dimensions specially adapted DIN 6353

The KFD power chucks are characterized by a high load carrying capacity, long life and high workholding accuracy.
The operating power i... more


No.: 143888 Power chucks with through-hole - KFD-HS

This chuck type offers an optimum of conditions for precise machining of both shaft and flange typed workpieces.
The design principle o... more


No.: 154239 Power chucks with through-hole - KFD-HS

This chuck type offers an optimum of conditions for precise machining of both shaft and flange typed workpieces.
The design principle o... more


No.: 159457 Power chucks with large through-hole - DURO-NC

Quick jaw-change,  high accurancy and high chucking power, especially fpr CNC-lathes... more


No.: 159465 Power chucks with large through-hole - DURO-NC

Quick jaw-change,  high accurancy and high chucking power, especially fpr CNC-lathes... more


No.: 165635 power-operated ball lock draw-down chuck KBF-N, size 200, 3-jaw, with solid jaw or pendulum jaws for internal and external clamping, hermetically sealed, oil-filled, centric clamping cylindrical center mount DIN 6353

for the machining of serial parts... more


No.: 165769 power-operated ball lock draw-down chuck KBF-N, size 200, 3-jaw, with solid jaw or pendulum jaws for internal and external clamping, hermetically sealed, oil-filled, centric clamping cylindrical center mount DIN 6353

for the machining of serial parts... more


No.: 165636 power-operated ball lock draw-down chuck KBF-N, size 200, KK 6 ISO 702-1 (DIN 55026/55021), 3-jaw, with solid jaw or pendulum jaws for internal and external clamping, hermetically sealed, oil-filled, centric clamping

for the machining of serial parts... more


No.: 165770 power-operated ball lock draw-down chuck KBF-N, size 200, KK 6 ISO 702-1 (DIN 55026/55021), 3-jaw, with solid jaw or pendulum jaws for internal and external clamping, hermetically sealed, oil-filled, centric clamping

for the machining of serial parts... more


No.: 144621 power-operated compensating chuck KFD-AF, size 200, 3-jaw, with serration 90° centering insert and mounting adapter interchangeable

for machining bar stock, pipes and shafts... more


No.: 161506 Stationary power chucks - SSP

used as stationary centering chucks on drilling, milling and special purpose machines... more


No.: 161506 Stationary power chucks - SSP

used as stationary centering chucks on drilling, milling and special purpose machines... more


No.: 161510 Stationary power chucks - SSH

used as stationary centering chucks on drilling, milling and special purpose machines... more


No.: 161510 Stationary power chucks - SSH

used as stationary centering chucks on drilling, milling and special purpose machines... more